Bryant/Carrier EXPXXFIL0024 | Our#: 198741

Bryant / Carrier EZ-FLEX Filter Media (EXPXXFIL0024)

Bryant/Carrier EXPXXFIL0024 | Our#: 198741

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee

4 people in your area recently purchased this product!

  •  Fast Shipping & Free Returns
  •  100% Compatibility Guarantee
Frequently Purchased Together
Frequently Purchased Together

Product Details

Factory original EXPXXFIL0024 EZ-FLEX filter fits Bryant/Carrier MACA, MPKA, FILCAB, EZXCAB series air cleaner cabinets. The EZ-FLEX expandable filter uses a simple, three-step process that is much faster and easier than any expandable filter on the market. 

  • MERV 10 filtration efficiency
  • Saves space - shipped in collapsed form - expand into re-useable end caps when you are ready to use filter
  • Nominal Dimensions: 24" x 25" x 5"
  • Actual Assembled Dimensions: 24-3/4" x 24-3/8" x 4-3/8" 
  • Fits Carrier EZXCABCC0024 and Bryant EZXCABBB0024 cabinet
  • Media comes shipped like a collapsed accordian, and must be expanded and snapped into black plastic end caps.  End caps are not included.  Kit with end caps can be purchased seperately (See Part# EXPXXUNV0024)
  • Change at least 2 times per year

Replaces These Filters:

National Filter Sales:
24x25x5

Additional Information




How to change your furnace/air-conditioner/HVAC air filter

Estimated time: 10 minutes or less

Steps

  1. Determine the location of your filter

    Your forced air system will be similar, whether or not it is a heating (furnace) or cooling (AC) system – or both. The furnace filter housing/slot is located right next to the heating/cooling system’s air handler or blower. Your filter(s) may also be located in a return grille on the wall or ceiling of your home.

  2. Determine the type/size of filter that you use

    Typically, the dimensions or part number of the filter will be printed on the filter frame. Use this information to order a new filter.

  3. Purchase a new air filter from DiscountFilters.com

    Visit DiscountFilters.com and purchase a new filter. Use our filter finders to verify the correct match.

  4. Remove the old filter

    Turn off the power to the heating/cooling system and remove the old filter from its housing/slot and discard.

  5. Insert the new filter

    Pay attention to any airflow direction arrows printed on the frame of the new filter. Install the filter by sliding it into the filter housing/slot with the airflow arrow pointing towards the blower. If installing the filter in a wall or ceiling grille – the airflow arrow should point towards the wall or ceiling. Turn on the power to the forced air system.

    Enjoy cleaner air!